Chlorine Dioxide Technologies from Nanotech
What makes OUR technology so uniquely different is their patent for under water reactors for concentrated chemicals, and SAFE vacuum systems for the municipal chlorine gas systems.
Technologies Available
- Liquichlor RTU: Ready to use from Powder/Liquid formulations
- Liquichlor Compact – Dilute: NaCLO2 (12%) and HCL (15%)
- Liquichlor Compact – Concentrate: NaCLO2 (25%) and HCL (32%)
- Liquichlor Pro: NaCLO2 (25%) and HCL (32%)
- Liquichlor Vapor:NaCLO2 (25%) and CL2 gas (100%)
Chlorine Dioxide Systems Capacities
- Clear RTU: 1-10 g/hr chlorine dioxide
- Clear Compact – Dilute: 10 – 90 g/hr chlorine dioxide
- Clear Compact – Concentrate: 100 -2500 g/hr chlorine dioxide
- Clear Pro: 2500 – 10 000 g/hr chlorine dioxide
- Clear Vapor:1000 to 20000 g/hr chlorine dioxide
Liquichlor Clear RTU (Ready To Use)
Clear RTU is used for smaller applications, and typically to replace hypo dosing stations. The product tank is filled with RTU chlorine dioxide , or it can be mixed on site with our powder/liquid formulations. Production capacity of chlorine dioxide is 12 g/h which can treat up to 6 m3/h of water at 2 ppm dosage.
Clear Compact
Clear Compact is used for small to medium sized applications, using the 2 chemicals dilute or concentrated chemistry. Production capacity of chlorine dioxide is up to 2500 or 5400 or 10000 g/h. Production of chlorine dioxide is underwater and therefore extremely safe, using our patented chemical reactor.
Clear PRO
Clear PRO is used for medium to bigger sized applications, where scada integration is required using the 2 chemical concentrate chemistry. Production capacity of chlorine dioxide is from 1.3 kg/h up to 10 kg/h. Volume of water of between 680 m3/h and 1000 m3/h can be treated at 2 ppm dosage.
Clear Vapor
Clear Vapor is used for municipal and bigger industrial applications where chlorine gas is available. Chlorine gas and sodium chlorite is used to produce chlorine dioxide. Production capacity of our standard units is up to 20 kg/h of product.
Complementary to our Product Offer
On-line measurement
On-line measurement and control of residual chlorine dioxide is one of the key success factors to maintain compliance and desired outcomes. The two methods employed depend on the quality of the water treated, mainly based on demand, suspended solids, fatty oils and flow conditions. In most applications, free residual chlorine dioxide is measured and controlled at between 0.2 to 0.4 ppm. The alternative is using ORP (oxidation reduction potentials) and typically controlled between 700 and 780 millivolts.
Remote management
Remote management capability proved significant return on investment where changes in operational parameters are communicated to the end-user. Proactive actions can then ensure compliance is maintained. These “faults” can be from a low chemical inventory, chemical dosing pumps not running, power failures or any error created by the system.
SLA (Service level Agreement)
This concept is not unique but is surely a “must have” in chlorine dioxide applications. Any break or interruption in continuous supply of the chlorine dioxide, chemical deliveries, preventative maintenance, call outs for breakdowns etc. interrupts the service delivery of the technology and sacrifices compliance. Nanotech has a full Engineering support team to assist technically and operationally where required.
Nanotech’s Extensive Reference List
We have growing customer reference list of over 100 applications and is available on request.
Customer Testimonials
“Nanotech is very professional in its services and has also gone the extra mile through continued free consultation, advice and presentations to prove the concept of chlorine dioxide generation and disinfection” – Water Utilities Corporation Botswana
“Herewith we at Sun City, confirm that Nanotech had Chlorine Dioxide technologies deployed for pre-treatment – Treating all incoming Potable water to the entire Sun City Resort. We have experienced nothing but extraordinary Service.” – Sun City
“It gives me great pleasure to write this recommendation for Nanotech Water Solutions as our Water Treatment contractor. Their speed of execution and level of professionalism resulted in overall efficient project delivery.” – AGT Waterworks Superintendent (Palapye)
“Magalies Water Cullinan would hereby like to confirm that Nanotech Water Solutions has been awarded a tender to manufacture, install and commission a chlorine dioxide generator for the Cullinan Water Treatment Plant”- Magalies Water
“Over the duration of the three (3) year contract, we had nothing but exceptional service. Nanotech deployed all the technologies, performed weekly services and proactive maintenance to ensure the solution added value” – City of Tshwane
The ultimate disinfection solution: Compliance | Competence | Commitment
